🚚 Free Worldwide Shipping on All Orders!Shop Now
HomeStore

Adafruit Feather M0 RFM69HCW Packet Radio - 433MHz

Product image 1
1 / 7

Adafruit Feather M0 RFM69HCW Packet Radio - 433MHz

The Feather M0 RFM69HCW Packet Radio (433 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 433 MHz. It includes built-in USB, LiPo battery charging, and the full Feather M0 pin set in a compact, portable form factor.

The RFM69HCW radio is ideal for small data packet transmission where you need greater range than 2.4 GHz technologies like Bluetooth, Wi-Fi, or ZigBee. With up to 100 mW output power, AES-128 encryption, and multipoint networking support, it suits a wide range of wireless sensor and control applications.

Key Features

  • ATSAMD21G18 Processor – ARM Cortex M0+ running at 48 MHz, 3.3V logic
  • 256 KB Flash + 32 KB RAM – 8× more flash and 16× more RAM than ATmega328/32u4
  • RFM69HCW 433 MHz Radio – SX1231-based packet radio with SPI interface
  • +13 to +20 dBm Output – Up to 100 mW transmit power, selectable in software
  • ~350 m Range – Depending on obstructions, antenna, and power settings
  • AES-128 Encryption – Hardware-accelerated encrypted packet engine
  • Multipoint Networking – Individual node addresses for creating wireless networks
  • Native USB – Built-in USB-to-Serial for programming and debugging, no FTDI chip needed
  • 20 GPIO Pins – Hardware Serial, I2C, and SPI; 8× PWM, 10× analogue inputs, 1× analogue output
  • LiPo Battery Support – JST connector with built-in 100 mA charger, battery voltage monitoring via analogue pin
  • Compact Design – 51 mm × 23 mm × 8 mm, weighing 5.8 g

Also Available

Ideal For

  • Wireless sensor networks and remote monitoring
  • Battery-powered radio telemetry
  • Point-to-point and multipoint data links
  • IoT projects requiring sub-GHz range

Package Contents

  • 1× Feather M0 RFM69HCW 433 MHz
  • 1× Header pin set
Note: A wire antenna must be soldered to the board (any solid or stranded core wire will work). LiPo battery and USB cable sold separately.
$15.16

Original: $50.53

-70%
Adafruit Feather M0 RFM69HCW Packet Radio - 433MHz—

$50.53

$15.16

Product Information

Shipping & Returns

Description

The Feather M0 RFM69HCW Packet Radio (433 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 433 MHz. It includes built-in USB, LiPo battery charging, and the full Feather M0 pin set in a compact, portable form factor.

The RFM69HCW radio is ideal for small data packet transmission where you need greater range than 2.4 GHz technologies like Bluetooth, Wi-Fi, or ZigBee. With up to 100 mW output power, AES-128 encryption, and multipoint networking support, it suits a wide range of wireless sensor and control applications.

Key Features

  • ATSAMD21G18 Processor – ARM Cortex M0+ running at 48 MHz, 3.3V logic
  • 256 KB Flash + 32 KB RAM – 8× more flash and 16× more RAM than ATmega328/32u4
  • RFM69HCW 433 MHz Radio – SX1231-based packet radio with SPI interface
  • +13 to +20 dBm Output – Up to 100 mW transmit power, selectable in software
  • ~350 m Range – Depending on obstructions, antenna, and power settings
  • AES-128 Encryption – Hardware-accelerated encrypted packet engine
  • Multipoint Networking – Individual node addresses for creating wireless networks
  • Native USB – Built-in USB-to-Serial for programming and debugging, no FTDI chip needed
  • 20 GPIO Pins – Hardware Serial, I2C, and SPI; 8× PWM, 10× analogue inputs, 1× analogue output
  • LiPo Battery Support – JST connector with built-in 100 mA charger, battery voltage monitoring via analogue pin
  • Compact Design – 51 mm × 23 mm × 8 mm, weighing 5.8 g

Also Available

Ideal For

  • Wireless sensor networks and remote monitoring
  • Battery-powered radio telemetry
  • Point-to-point and multipoint data links
  • IoT projects requiring sub-GHz range

Package Contents

  • 1× Feather M0 RFM69HCW 433 MHz
  • 1× Header pin set
Note: A wire antenna must be soldered to the board (any solid or stranded core wire will work). LiPo battery and USB cable sold separately.

You may also like

-70%
Thumbnail 1Thumbnail 2

EL Panel - Blue (10x10cm)

$29.01

$8.70

Thumbnail 1Thumbnail 2

EL Tape - Red (1m)

$18.74

-70%
Thumbnail 1Thumbnail 2

Adafruit PCF8523 Real Time Clock Assembled Breakout Board

$14.32

$4.30

Thumbnail 1Thumbnail 2

8 eTape Liquid Level Sensor + extras

$85.41

-70%
Thumbnail 1Thumbnail 2

Adafruit DS1307 Real Time Clock Assembled Breakout Board

$14.63

$4.39

Thumbnail 1Thumbnail 2

FT232 USB to TTL Serial Cable

$20.73

-70%
Thumbnail 1Thumbnail 2

iNecklace [v1.0]

$182.91

$54.87

Thumbnail 1Thumbnail 2

Arrow Presents: Advanced Internet of Things Pack [Back to School with LadyAda]

$421.50

Thumbnail 1Thumbnail 2

Graphic ST7565 Positive LCD (128x64) with RGB backlight + extras [ST7565]

$43.78

Thumbnail 1Thumbnail 2

Adafruit Universal Thermocouple Amplifier MAX31856 Breakout

$36.63

-70%
Thumbnail 1Thumbnail 2

Adafruit Si7021 Temperature Humidity Sensor Breakout Board

$20.02

$6.01

Thumbnail 1Thumbnail 2

High Brightness Orange Electroluminescent (EL) Wire - 2.5 meters [High brightness, long life]

$29.17