Realtek Ameba-RTL8195AM WiFi NFC Module wireless remote control/ telecontrol: Gravity: 315MHz RF Receiver Module
Realtek Ameba-RTL8195AM WiFi NFC Module wireless remote control/ telecontrol: Gravity: 315MHz RF Receiver Module
The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and MicroPython programming, making it accessible for rapid IoT prototyping and development.
With a rich set of interfaces including USB 2.0, Ethernet MII/RMII, SDIO, SPI, I2C, UART, PWM, ADC, and DAC, this module is well-suited for connected applications requiring both wireless communication and extensive peripheral control. The U.FL antenna connector allows use of external antennas for improved range.
Key Features
- ARM Cortex-M3 @ 166 MHz – 32-bit MCU with 1 MB ROM, 2 MB SDRAM, 512 KB SRAM
- Wi-Fi 802.11 b/g/n – Up to 150 Mbps, station/softAP/mixed modes
- NFC Read/Write – Built-in Near Field Communication support
- 10/100 Ethernet – MII/RMII/RGMII interface
- USB 2.0 OTG – Host and device support
- Hardware SSL Engine – Secure communications built in
- Arduino & MicroPython – Dual programming environment support
- Ultra-Low Power – Designed for battery-powered IoT applications
Specifications
- Operating Voltage – 3.0–3.3 V
- Processor – 32-bit ARM Cortex-M3 (166 MHz)
- Memory – 1 MB ROM, 2 MB SDRAM, 512 KB SRAM
- Wi-Fi – 802.11 b/g/n (up to 150 Mbps)
- GPIO – Up to 30 configurable pins
- Interfaces – 2× SPI, 3× UART, 2× I2C, 2× I2S/PCM, 4× PWM, 2× ADC, 1× DAC
- Antenna – U.FL connector
- Operating Temperature – −20°C to +85°C
- Dimensions – 19 × 24 mm
Ideal For
- IoT product development and prototyping
- Wi-Fi + NFC connected devices
- Smart home and industrial IoT applications
- Networked sensor and control systems
Package Contents
- 1× Realtek Ameba RTL8195AM Wi-Fi & NFC Module
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and MicroPython programming, making it accessible for rapid IoT prototyping and development.
With a rich set of interfaces including USB 2.0, Ethernet MII/RMII, SDIO, SPI, I2C, UART, PWM, ADC, and DAC, this module is well-suited for connected applications requiring both wireless communication and extensive peripheral control. The U.FL antenna connector allows use of external antennas for improved range.
Key Features
- ARM Cortex-M3 @ 166 MHz – 32-bit MCU with 1 MB ROM, 2 MB SDRAM, 512 KB SRAM
- Wi-Fi 802.11 b/g/n – Up to 150 Mbps, station/softAP/mixed modes
- NFC Read/Write – Built-in Near Field Communication support
- 10/100 Ethernet – MII/RMII/RGMII interface
- USB 2.0 OTG – Host and device support
- Hardware SSL Engine – Secure communications built in
- Arduino & MicroPython – Dual programming environment support
- Ultra-Low Power – Designed for battery-powered IoT applications
Specifications
- Operating Voltage – 3.0–3.3 V
- Processor – 32-bit ARM Cortex-M3 (166 MHz)
- Memory – 1 MB ROM, 2 MB SDRAM, 512 KB SRAM
- Wi-Fi – 802.11 b/g/n (up to 150 Mbps)
- GPIO – Up to 30 configurable pins
- Interfaces – 2× SPI, 3× UART, 2× I2C, 2× I2S/PCM, 4× PWM, 2× ADC, 1× DAC
- Antenna – U.FL connector
- Operating Temperature – −20°C to +85°C
- Dimensions – 19 × 24 mm
Ideal For
- IoT product development and prototyping
- Wi-Fi + NFC connected devices
- Smart home and industrial IoT applications
- Networked sensor and control systems
Package Contents
- 1× Realtek Ameba RTL8195AM Wi-Fi & NFC Module
