🚚 Free Worldwide Shipping on All Orders!Shop Now
HomeStore

Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz

Product image 1
1 / 6

Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz

The Feather M0 RFM95 LoRa Radio (900 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The exact frequency is software-configurable, allowing you to tune dynamically for your region's ISM band. LoRa modulation delivers significantly greater range than conventional packet radio — over 2 km line-of-sight with default settings, and up to 20 km with optimised configurations and directional antennas.

LoRa is ideal for low-power, low-data-rate applications where range matters more than bandwidth. It outperforms 2.4 GHz technologies like Bluetooth, Wi-Fi, and ZigBee in range while maintaining very low sleep current consumption.

Key Features

  • ATSAMD21G18 Processor – ARM Cortex M0+ running at 48 MHz, 3.3V logic
  • 256 KB Flash + 32 KB RAM – 8× more flash and 16× more RAM than ATmega328/32u4
  • RFM95 LoRa 868/915 MHz Radio – SX1276-based LoRa transceiver with SPI interface, software-tuneable frequency
  • +5 to +20 dBm Output – Up to 100 mW transmit power, selectable in software
  • 2+ km Range – Line-of-sight with default settings; up to 20 km with optimisation
  • Ultra-Low Power – ~300 µA full sleep, ~120 mA peak transmit (+20 dBm), ~40 mA active listening
  • Native USB – Built-in USB-to-Serial for programming and debugging, no FTDI chip needed
  • 20 GPIO Pins – Hardware Serial, I2C, and SPI; 8× PWM, 10× analogue inputs, 1× analogue output
  • LiPo Battery Support – JST connector with built-in 100 mA charger, battery voltage monitoring via analogue pin
  • Compact Design – 51 mm × 23 mm × 8 mm, weighing 5.8 g

Also Available

Ideal For

  • Long-range wireless sensor networks
  • Remote environmental monitoring
  • Battery-powered IoT nodes requiring kilometre-scale range
  • Low-power telemetry and tracking

Package Contents

  • 1× Feather M0 RFM95 LoRa 900 MHz
  • 1× Header pin set
Note: A wire antenna must be soldered to the board (any solid or stranded core wire will work). LiPo battery and USB cable sold separately.
$69.75
Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz—
$69.75

Product Information

Shipping & Returns

Description

The Feather M0 RFM95 LoRa Radio (900 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The exact frequency is software-configurable, allowing you to tune dynamically for your region's ISM band. LoRa modulation delivers significantly greater range than conventional packet radio — over 2 km line-of-sight with default settings, and up to 20 km with optimised configurations and directional antennas.

LoRa is ideal for low-power, low-data-rate applications where range matters more than bandwidth. It outperforms 2.4 GHz technologies like Bluetooth, Wi-Fi, and ZigBee in range while maintaining very low sleep current consumption.

Key Features

  • ATSAMD21G18 Processor – ARM Cortex M0+ running at 48 MHz, 3.3V logic
  • 256 KB Flash + 32 KB RAM – 8× more flash and 16× more RAM than ATmega328/32u4
  • RFM95 LoRa 868/915 MHz Radio – SX1276-based LoRa transceiver with SPI interface, software-tuneable frequency
  • +5 to +20 dBm Output – Up to 100 mW transmit power, selectable in software
  • 2+ km Range – Line-of-sight with default settings; up to 20 km with optimisation
  • Ultra-Low Power – ~300 µA full sleep, ~120 mA peak transmit (+20 dBm), ~40 mA active listening
  • Native USB – Built-in USB-to-Serial for programming and debugging, no FTDI chip needed
  • 20 GPIO Pins – Hardware Serial, I2C, and SPI; 8× PWM, 10× analogue inputs, 1× analogue output
  • LiPo Battery Support – JST connector with built-in 100 mA charger, battery voltage monitoring via analogue pin
  • Compact Design – 51 mm × 23 mm × 8 mm, weighing 5.8 g

Also Available

Ideal For

  • Long-range wireless sensor networks
  • Remote environmental monitoring
  • Battery-powered IoT nodes requiring kilometre-scale range
  • Low-power telemetry and tracking

Package Contents

  • 1× Feather M0 RFM95 LoRa 900 MHz
  • 1× Header pin set
Note: A wire antenna must be soldered to the board (any solid or stranded core wire will work). LiPo battery and USB cable sold separately.